Overall Height of TracRac CapRac part # TA29200

Question

Question:

I am looking at this rack to put on my fiberglass cap on my 2012 Silverado 1500. Do you have a spec sheet you could send me, that shows dimensions of how high the rack is and how long the bracket is that mounts to the fiberglass. Also wondering if the 65” cross bars can be cut shorter. Thanks

asked by: Kevin R

0

Expert Reply:

From the top of the camper shell on your truck to the top of the TracRac CapRac part # TH29200XT will measure 10-1/4 inches. Since the bars are 1-5/8 tall that means the legs are 8-5/8 inches. There's no reason you couldn't cut the crossbars shorter but you'd void the warranty by doing so.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For a roof rack system that will work perfectly on the cap for your 2018 Ford F-150 with the 5-1/2 foot bed I recommend the Thule TracRac CapRac Ladder Rack #TH29200XT. This is a durable but lightweight aluminum rack that is designed specifically…

view full answer...

Answer 2

Yes, all other components for the TracRac CapRac Ladder Rack, #TH29200XT, can be removed while leaving the swivel brackets in place. I have included a snapshot of the installation guide to show how the rack corner attaches to the swivel bracket.…

view full answer...

Answer 3

The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap #TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

Hey Robert, so the Dexter Torflex lift kit part #K71-725-02 that you referenced is designed to fit Torflex axles that are between 5,500 and 7,000 lbs. I don't know for certain what axles your horse trailer has so you'd need to verify…

view full answer...

Answer 6

Since your Perception Kayak-Rambler is a larger kayak I recommend using the Yakima Kayak Carrier with Tie-Downs #Y04083-04082. This combines the DeckHand and HandRoll carriers so that you get the ease of loading with the rollers but the stability…

view full answer...

Answer 7

Yes, the TrackTowers for Yakima Crossbars and Platforms #Y52AV that you referenced do fit the Rhino-Rack RTC-Style Roof Rack Tracks #RTC18.

view full answer...

Answer 8

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 9

The TracRac CapRac Ladder Rack for Camper Shell/Truck Cap #TA29200XT is proudly made here in the USA. It features two 65" aluminum crossbars that allow you to carry as much cargo as your truck cap will allow. I have attached a review video for…

view full answer...

Answer 10

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 11

Yes, the Dometic 300 Weekender RV Toilet #DOM64FR will work as a replacement for your original Thetford. This requires a rough-in measurement of 8-1/2" so since your measurement is 8-3/4" you won't have any problems getting it to fit.

view full answer...

Overall Height of TracRac CapRac part # TA29200

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching