Mounting Hole Diameter and Spacing of Pintle Eye T1613700

Question

Question:

Do you carry a 3 inch ID 5x4 bolt pattern eye with 5/8 inch bolt holes

asked by: Alan B

0

Expert Reply:

We have several 3-inch lunette ring (pintle eye) couplers that are shown on the linked page. These are offered with and without a channel mount, such as # T1812800 and # T1613700, respectively.

I went to our warehouse and measured the hole size and spacing on part # T1613700. Each hole is indeed 5/8-inch diameter and their centers are spaced apart by 2-inches.

expert reply by: Adam R

0

Answer 1

The mounting bolt pattern for the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring #337BDB1385 that you referenced is 4-1/2 inches square.

view full answer...

Answer 2

Unless otherwise stated on the wheel itself, wheels themselves will be able to withstand the psi rating of any tire that is confirmed to fit it. The piece that you will want to look at is the valve stem. If you have a rubber valve stem then the…

view full answer...

Answer 3

If you think the cause for the noise on your 2015 Jayco Whitehawk 24RBS tandem-axle travel trailer is from the normal travel of the suspension components (leaf springs, equalizers and shackle straps), you might switch over to wet bolts. The squeaking…

view full answer...

Answer 4

For your 4x6 utility trailer, I recommend using the Taskmaster 4.80R12 Radial Trailer Tire part #TT48012C. This tire has a radial ply construction which will be better for the longer highway trips you intended to make. It has a load range C rating…

view full answer...

Answer 5

Sounds like you are looking for a 7-way for a brake controller and a 12v hot lead for your 2008 Toyota Tacoma, so I would recommend the Universal Installation Kit for Trailer Brake Controller, part #ETBC7. This includes everything needed to install…

view full answer...

Answer 6

Those look to be the slide flange-to-flange measurements, and we do have the correct slide toppers in black for each of them: - 74 Inch Measurement: Solera RV Slide-Out Awning #LCV000168105 - 159 Inch Measurement: Solera RV Slide-Out Awning…

view full answer...

Answer 7

You're correct. The repalcement for your existing B12EA-22 brake would be #AKEBRK-7R-SA for the right side and #AKEBRK-7L-SA for the left.

view full answer...

Answer 8

Those are Warner trailer brakes. This style is not made anymore and replacement parts are hard to find. We have some parts for the larger Warner assemblies but NOT the 12 x 2 inch ones. Most people end up replacing them. You will have to have…

view full answer...

Mounting Hole Diameter and Spacing of Pintle Eye T1613700

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching