Replacement Hardware Kit for Firestine Ride-Rite Air Helper Springs # F2430

Question

Question:

I am putting this kit from one truck to the other the hardware has been missed placed. Can I purchase a kit with the original bump stop mounting bolt ,spacer and 4 jay bolts per side? Thanks

asked by: Myles

0

Expert Reply:

For a replacement hardware kit for your Firestone Ride-Rite Air Helper Springs # F2430, you can use part # FA21-760-2430. If you also need the Bail Clamps, you will just need part # F3373.

expert reply by: Chris R

0

Answer 1

When we removed the rear bump stops on a 2016 Chevy Silverado 2500 to install a set of the Timbren Rear Suspension Enhancement System part #TGMRCK25D, we found that by using a screwdriver and placing the end between the jounce spring and mounting cup…

view full answer...

Answer 2

Installing the Firestone Ride-Rite Air Helper Springs #F2430 on your 2015 Chevy Silverado 1500 does indeed require you to first remove the factory rubber jounce bumpers on the truck. I spoke with my contact at Firestone and he said that all you will…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Replacement Hardware Kit for Firestine Ride-Rite Air Helper Springs # F2430

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching