Mounting Hole Spacing for Titan Trailer Coupler # T2330900

Question

Question:

WE HAVE A SIMILAR COUPLER ON ONE OF OUR EQUIPMENT TRAILERS. WHAT IS THE DISTANCE BETWEEN THE MOUNTING HOLES ON THIS UNIT? WE MAY BE ABLE TO USE THE COUPLER WITHOUT HAVING TO CUT OFF OUR CHANNEL AND MOUNT THE NEW ONE.

asked by: Ryan J

0

Expert Reply:

Top to bottom the mounting holes on Titan Trailer Coupler # T2330900 are spaced 2 inches apart on center. The inside width between the holes is a hair under 3 inches. The coupler by itself is # T1882000 if you determine that it will fit the channel mount you already have.

expert reply by: Michael H

0

Answer 1

In terms of ride quality and handling there is no difference between the Equa-Flex #LC279687 and the Road Armor #LC696740. However, both will be a great upgrade over what you have now. Between these and other cushioned equalizers the best option is…

view full answer...

Answer 2

To determine the correct replacement equalizers, bushing, wet bolts, shackles straps, etc. you'll need to do a bit of measuring first. The manufacturer designed the suspension to sit in a specific way so that it can roll back and forth so…

view full answer...

Answer 3

Dexter hub drum assembly #8-219-13UC3 is a replacement for your hub drum according to my contact at Redneck Trailer Supply. This is rated for 7K, has a 8-on-6-1/2 bolt pattern and 9/16-inch studs. You can also identify compatible replacement…

view full answer...

Answer 4

The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links #AP233 is not only for under 3,500 lb axles. It is for 33 inch spacing. The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye…

view full answer...

Answer 5

Thank you for providing the picture. However you hit that wood it managed to shove the one side up so far it pushed the other side into that position which prevented your wheel from coming back down. I wouldn't say something was necessarily…

view full answer...

Answer 6

Based on the serial number you provided my contact at Dexter was able to confirm that your axle uses the following components: Inner bearing #14125A Outer bearing #25580 Grease seal #RG06-070 Braking Assemblies Left #23-464, and Right #23-465 Hub and…

view full answer...

Answer 7

There is a heavier duty version of the etrailer Suspension Kit for Tandem-Axle Trailers item #e99ZR and it has the wet bolts and bronze bushings you are looking for. It's the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers item…

view full answer...

Answer 8

Yep, you sure can; the Dexter Trailer Coupler #T1882000 is what you are looking for.

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Mounting Hole Spacing for Titan Trailer Coupler # T2330900

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching