Recommendation For A Winch To Pull A Harley Triglide Into A Toy Hauler
Question:
Bike weighs about 1150 pounds. Ramp is 8 feet long and pitch is about 40 degrees. Will be pulling it backwards to allow pipes to clear. Any suggestions?
asked by: Dave
Expert Reply:
Nice ride! I recommend using a power winch like the Superwinch LT2000 Electric Utility Winch, Item # 1120210. This winch has a 50 foot wire rope, has a rated line pull of 2,000-lbs, and a plug-in remote. This winch is a high efficiency low amp draw motor that will need 12v power. Make sure to firmly mount it in a stable location on your trailer. The Superwinch is capable of pulling about 4,300-lbs of rolling load up a 40 degree ramp which will be more than enough for your Harley Triglide.
I have attached links to some articles and our available inventory for you to check out.
![Brint H](https://images.etrailer.com/static/images/catg/people/1418_tn.jpg)
Product Page this Question was Asked From
Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
- Electric Winch
- ATV - UTV Winch
- 1-Stage Planetary Gear
- 1.0 HP
- 1001 - 2000 lbs
- 11 - 20 lbs
- Slow - 0 to 4 fpm
- No Remote
- Wire Rope
- Superwinch
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: 28 leaf spring
- Search Results: dexter
- Search Results: dexter hub
- Search Results: axle
- Search Results: hubs
- Search Results: hub
- Search Results: 2500 lb axle
- Q&A: Can 15 inch Wheels be Used with a 2,000-lb Trailer Axle
- Video: Review of etrailer Trailer Fenders - Single Axle Fender with Backing - HP29FR
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Video: Review of Kenda Trailer Tires and Wheels - Karrier ST205/75R15 LR C Radial 15 Inch Aluminum - KE27JR
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Article: How to Wire an Electric Winch
- Q&A: Replacement Hubs and Bearings for JetSki Trailer
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Trailer Hub To Spindle Combinations for 2000 Pound or 3500 Pound Axle
- Q&A: How to Choose Correct Replacement Trailer Idler Hub
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Q&A: Do Trailer Hubs have a Speed Rating for Use on a Boat Trailer and Highway
- Video: Review of Stromberg Carlson Camper Jack - Trailer Jack 7 Pad - SC88VR
- Shop: RV Jack Pads
- Video: Race Ramps Trailer Loading Assist Ramps Review