Recommended Trailer Valet XL with 2 Inch Hitch Ball

Question

Question:

I need the 2” ball for the trailer valet XL, can you tell me which one I need?

asked by: Richard C

0

Expert Reply:

The Trailer Valet XL Trailer Dolly with Chain Drive # TVXL2 has the 2 inch ball. If you already have the Traler Valet and just need the 2 inch ball, then you will want # TVHB2 or the base and ball # TVBB2.

expert reply by: Jason S

0

Answer 1

The base simply makes exchanging between two hitch ball options easy because no wrench is required. Since it sounds like you simply need the 2 inch ball you will just need the hitch ball #TVHB2 and not the combination with the base. This hitch ball…

view full answer...

Answer 2

To provide a 2 inch hitch ball for your Trailer Valet XL #TVXL25 that came with a 2-5/16 inch ball, you can use the 2 Inch Hitch Ball for Trailer Valet XL Trailer Dolly #TVHB2. This part number will provide you with a new 2 inch diameter ball for…

view full answer...

Answer 3

Yes, the existing 2-5/16" hitch ball on your Trailer Valet XL Trailer Dolly #TVXL25 can simply be removed/unscrewed and replaced with the Replacement 2" Hitch Ball #TVHB2. The mounting base for the two ball sizes are the same so that can be…

view full answer...

Answer 4

From the picture that you sent (thank you for that) and the way that you are describing that the Trailer Valet XL #TVXL2 is moving I would have to say that you might not be installing the Trailer Valet XL properly on your coupler. I have attached a…

view full answer...

Answer 5

The Trailer Valet V2 Trailer Dolly with Chain Drive - 2" and 2-5/16" Hitch Ball TVXLV2 has been discontinued by the manufacturer. It did come with the 9 inch solid tires, the stabilizer bracket, and the coupling plate. The Trailer Valet XL…

view full answer...

Answer 6

I would first double check to make sure that everything is installed properly. The hitch ball that comes with the Trailer Valet XL #TVXL2 has a base that you spin to lock your unit to the coupler so that it sits straight. If you have an older version…

view full answer...

Answer 7

Yes, you want the ball size to match the coupler on your trailer. We do have the 2-5/16" Hitch Ball w/ Base #TVBB25 that you can use with your Trailer Valet XL Trailer Dolly #TVXL2 with the 2" ball. This would help you to reduce the valet…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Recommended Trailer Valet XL with 2 Inch Hitch Ball

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching