Is Curt TruTrack Weight Distribution System Good for Trailer with 650 Pound Tongue Weight
Question:
If my trailer would be around 8000lbs fully loaded, and a tongue weight of 650lbs, would this Curt WD System be too much? I was going to go with the E2 from Fastway, but I like this 4 point system
asked by: Gary B
Expert Reply:
The Curt TruTrack is a great system with the 4-point sway control.
You want your total, ready to tow tongue weight to fall somewhere in the middle of the range a weight distribution system is rated for. The Curt TruTrack, part # C17500, you referenced is rated for 800 to 1,000 pounds of tongue weight. So it might be a little high for you. However, you also need to add in the amount of weight you add behind the rear axle of your tow vehicle to your loaded trailer's tongue weight. So if you have more than 150 pounds behind the truck's rear axle to add to the 650 pounds of trailer tongue weight this may be a good choice.
Another great option, that may put you within the range and still has the 4-point sway control, is the Equal-i-Zer, part # EQ37100ET. It's rated from 600 to 1,000 pounds of tongue weight so it has a larger range than the Curt. It's also one of the top selling and highest recommend systems we carry.
Both systems include everything you need including the shank and hitch ball. However, you may need a thin walled socket, like part # ALL643216, to install the hitch ball on the Equal-i-Zer system.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement for AL-KO 1530116 and 1530117 Brakes
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Closest Metric Replacement Tire Size for 7.00-15 Tire on Livestock Trailer
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle