Will The Du-Ha Wheeled Storage and Gun Case Bracket Work with Spray-In Truck Bedliner?

Question

Question:

Will this work with bracket in a truck with a spray-in bedliner?

asked by: Dan

0

Expert Reply:

The Du-Ha Tote Wheeled Storage Container and Gun Case # DU70103 and mounting bracket # DU70104 will work fine with a spray-in bed liner. It won't have any impact at all on the function of this unit and installation will be exactly the same.

I recommend using locks like # 141T for this application.

expert reply by: Jason S

0

Answer 1

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 2

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 3

The best way to determine the weight capacity of your leaf springs would be to check the weight rating of the axle on your trailer. The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be…

view full answer...

Answer 4

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 5

Trailer tires and wheels do not typically come balanced from the factory like what you see with standard passenger vehicle tires. This isn't usually needed for trailer tires and most car shops don't have the needed setup to properly balance…

view full answer...

Answer 6

For a spare for your Stratos boat trailer the most popular option I recommend is the Kenda #AM32131 which is the size you have ST205/75R14, is a Load Range C like you need and comes on a black wheel with the matching bolt pattern you need of 5 on…

view full answer...

Answer 7

The Trailer Hub Assembly for 3,500 lb Axles, #84550BX, was confirmed by Dexter to be the assembly which replaced part 8-208, but please note that it does have a 5 on 5 bolt pattern, and you mentioned yours was a 5 on 4.5. To determine which bolt…

view full answer...

Answer 8

Yep! The Thule Motion XT #TH629907 you were looking at will indeed fit the factory crossbars on your 2016 Toyota Land Cruiser. You will need to measure from the center of the front crossbar to the line where the hatch and roof meet, and you'll…

view full answer...

Answer 9

The Du-Ha Tote Wheeled Storage Container and Gun Case #DU70103 when used with the mounting bracket #DU70104 will allow you to lock the carrier to the frame and easily slide the container in the track. The bracket supports the box even when only…

view full answer...

Answer 10

To retain your current hitch, you could use the #63153 Reese 24x60 carrier in the adapter you have installed already, but because the extender moves the load of the carrier and what's carried upon it further away from the hitch, using the adapter…

view full answer...

Answer 11

The new mounting brackets that come with the 2.0 are designed to wrap around a crossbar so placing them around the Rooftop Tent Mounting Brackets for Rhino-Rack Pioneer Platform Racks #RR57RH wouldn't really give you a secure fit. You would need…

view full answer...

Will The Du-Ha Wheeled Storage and Gun Case Bracket Work with Spray-In Truck Bedliner?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching