Recommended Puck Adapter for 2015 GMC 2500 with 4-Puck Factory Look System

Question

Question:

My 2015 gmc 2500hd has factory towing set up with four holes in the bed of the truck. I want to put gooseneck in but can not figure out what system mounts into the holes. It looks like the holes have a slot notched out to receive a catch and lock down. Any ideas on what would work.

asked by: Jeff

0

Expert Reply:

Based on the year, the system is most likely not a factory system. GMC and Chevy did not have a factory puck system until 2016 and it included the gooseneck puck so there were 5 holes. If you have the 4 pucks it most likely is the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches # RP30868 which is confirmed to fit your truck.

For a compatible gooseneck hitch, I recommend the Reese Elite Series Above-Bed Gooseneck Trailer Hitch - 25,000 lbs # RP30845. This is a simple fit made to work together. You do have another option of using the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000 lbs # RP30156 and then using another adapter like the Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW # 16085.

Another option is to simply add the gooseneck hitch to your under-bed system, which will give you the 4 pucks and the gooseneck integrated using the Reese Elite Series Under-Bed Gooseneck Trailer Hitch Head Kit - 25,000 lbs # RP30158.

I also recommend the 5th wheel/gooseneck wiring harness # 50-97-410 to add a second 7-way to the bed of your truck for easy connection.

expert reply by: Jason S

0

Answer 1

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 2

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 4

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Recommended Puck Adapter for 2015 GMC 2500 with 4-Puck Factory Look System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching