Dimensions of Smallest Reducer of Gen-Turi RV Generator Exhaust System

Question

Question:

need to know the pipe dimensions of the smallest reducer on Camco Gen Turi part CAM44881

asked by: Jim L

0

Expert Reply:

The smallest sleeve of the Camco Gen-Turi Transfer Kit, part # CAM44881, has an inner diameter of 1.23 inches and an outer diameter of 1.34 inches. It's 1-1/2 inches long.

This is used to move the Gen-Turi RV Generator Exhaust System, part # CAM44461, to another RV.

expert reply by: Charles S

0

Answer 1

The Camco Gen-Turi RV Generator Exhaust System #CAM44461 can use the Camco Suction Cup Mounts for Gen-Turi Exhaust System - Qty 2 #CAM44850 for simple mounting. This system uses slotted bushings for an integrated fit. It sounds like you also want the…

view full answer...

Answer 2

Rubber hoses like the MB Sturgis Propane Hose #MBS84FR should never be used for any permanent gas installations. You're going to want to use copper tubing when permanently installing any gas applications.

view full answer...

Answer 3

We do have just the coupler portion of the part #CAM44881 that you are looking for as the part #CAM44842.

view full answer...

Answer 4

I reached out to Camco regarding a weld-on installation of the bushings for the Gen-Turi RV Generator Exhaust System #CAM44461. According to my contact, this is a perfectly acceptable way to install the system. When possible, welding will always…

view full answer...

Answer 5

In order to ensure that the exhaust from the Camco Gen-Turi RV Generator Exhaust System #CAM44461 does not enter into your A/C, there is definitely one thing you can do to ensure it doesn't enter your system. For a guaranteed way, I recommend…

view full answer...

Answer 6

What you are referring to is something like the Camco Gen-Turi RV Generator Exhaust System #CAM44461 which directs exhaust up above the roof line of the RV so that it doesn't affect you or any neighbors near you. It also makes the generator a…

view full answer...

Answer 7

The space that is between the outer wall of your coach and the exhaust pipe is going to depend on where your generator is and where the exhaust pipe you're connecting to is located. I can tell you that the 90 degree pipe on the bottom of the…

view full answer...

Answer 8

The Camco Gen-Turi RV Generator Exhaust System part #CAM44461 won't create any issues for the roof vents. The only thing you'd need to watch out for is a vent with electric fan that is reversible. In which case, you would not want to be using…

view full answer...

Answer 9

I reached out to my contact at Camco and the largest bushing included with the Camco Gen-Turi RV Generator #CAM44461 is 1-3/4" in diameter. To use this with your 2-3/8" exhaust you will need to take the kit along with your vehicle to a…

view full answer...

Answer 10

The Camco Gen-Turi RV Generator Exhaust System #CAM44461 is a very basic exhaust extension, so your question about rain is valid. I reached out to the manufacturer and they said that there isn't an issue with any large amounts of water getting…

view full answer...

Answer 11

Yes, the Camco Gen-Turi Replacement 30" EMT Straight Discharge Pipe #CAM44802 is an extension that can connect to your generator exhaust pipe and the Gen-Turi. I've attached a picture below of a neighbor's setup using this pipe. We also…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Dimensions of Smallest Reducer of Gen-Turi RV Generator Exhaust System

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching