Recommended Repair Kit for Roadmaster Falcon 2 Tow Bar

Question

Question:

My Falcon 2 Model 252284-10 S/N 053510 I am looking for which repair kit I will need to rebuild my towbar. Everything functions fine except it is rather loose compared to when new.

asked by: Todd

0

Expert Reply:

Since everything on your Roadmaster Falcon 2 tow bar still functions, it sounds like you just need the Complete Repair Kit for Roadmaster Falcon 2 and BlackHawk Tow Bars # RM-910003-60 to replace the bushings and springs. This will help you get things firmed up to function like new.

expert reply by: Jason S

0

Answer 1

I spoke to my contact at Roadmaster and they informed me that the issue you are having is more than likely a worn out bushing. The inner arms are made of stainless steel so rust would not be the issue. In order to get the tow bar back up to speed you…

view full answer...

Answer 2

Your memory does serve you right and both arms on your Roadmaster Falcon 2 #RM-520 are designed to "lock up" as this is not a non-binding tow bar; whether or not they've been able to get the arms to lock without performing the two sharp…

view full answer...

Answer 3

Over time, dirt and debris can build up on the retracting portion of the tow bar arms. When the arms retract, this dirt is carried into the interior of the tow bar, and can foul out the locking mechanism on one or both of the tow bar arms. This is…

view full answer...

Answer 4

The correct rebuilt kit for your Roadmaster Falcon 2 tow bar #RM-520 with serial number 044471 is the part #RM-910003-60 that you referenced.

view full answer...

Answer 5

Do you have the RM-525 or the RM-520? Is it a tow bar designed for a Blue Ox or Roadmaster base plate? And which specific bolt is it?

view full answer...

Answer 6

The repair kit that you will need for your Falcon 2 Tow Bar, #RM-520, is the Locking Pin Repair Kit, #RM-910003-80. The Autowlok feature on your tow bar is not engaging, so this repair kit will replace the inner locking mechanism which includes the…

view full answer...

Answer 7

I'm assuming you're speaking of the 3/4 inch bolt and nut that joins the yoke to the stinger assembly, which are items #14 and #15 as shown in the provided diagram. If that's what you're speaking of, then yes we do offer that nut and…

view full answer...

Answer 8

Over time the AutowLock buttons of the Roadmaster Falcon 2 Tow Bar #RM-520 can wear out and need to be replaced. The good news is that we carry a repair kit for this to get it back to normal. For that you would need the part #RM-910003-60.

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Recommended Repair Kit for Roadmaster Falcon 2 Tow Bar

Product Page this Question was Asked From

Continue Researching