bing tracking image
Q & A Icon

Installation of Brake Controller on 2015 Ford Transit T250 With Factory Tow Package  

Question:

trying to get a basic trailer brake controller for my 2015 ford transit t250, that came equiped from the factory with a tow package. When I enter my model, all the controllers mention without factory trailer connector then says below at the bottom: Installation Notes: You need item ETBC7 to install your controller. You may also need a 4-Way connector Do i need that? I already have the factory tow package? Please let me know what I need exactly, and how hard it is for me to install. thanks

0

Expert Reply:

Since you already have the factory tow package in your 2015 Ford Transit T250, I recommend the Tekonsha Voyager # 39510 along with the harness # 20127 to give you your basic controller. This will need to be hardwired as your vehicle doesn't have the dash adapter. I recommend using a circuit tester like # PTW2993 to test wires for function before splicing.

If there are no brake controller output wires and 12V power lined under your dash, then to hardwire your controller you will need # 5506 to connect it to your 7-way trailer connector on your Transit. This is not a difficult install and will be very similar to the # ETBC7. I've attached an article and videos to assist.

Let me know if you have further questions.

expert reply by:
0
Jason S

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>