Dust Cap with Over 1 Inch Depth with 1.98 Inch Diameter
Question:
Ive tried the standard 1.98inch dust cap from a couple of local suppliers. None have been deep flange enough. Whats the deepest flange depth over 1.1?? that you have available. The depth from the edge of the flat part that sits against the axle to the top of the cap is what I'm looking for. I saw the "normal one" at 0.94" and saw some that were deeper than that? Does this make more sense? My nut to hold the stuff together is at least 1" deep (tall). Thanks.
asked by: Dave O
Helpful Expert Reply:
We don't have the "normal" grease caps that will fit your assembly, however, the 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1 # DC200L-DCRP will work just fine for you. Even though you don't have the zerk fitting on your spindle, these grease caps will work very well of you. The rubber cap will still keep dirt and debris out as well as moisture. Any of the Bearing Buddy protectors for your 1.98 like # BB1980A will also work for your application.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Fulton Grease Cap - 1.943" Outer Diameter - 1-3/8" Tall - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.943 Inch O.D.
- Fulton
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Measuring a Trailer Tire
- Q&A: Trailer Hub Dust Cap for 1.940 Hub Bore
- Q&A: Grease Cap Recommendation for Trailer Hub with 1.938 inch Bore
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: Looking for 1.94 Inch Grease Cap and 35898 Grease Seal
- Article: Most Popular Wheel Bearings
- Q&A: Grease Caps With Outer Diameter Smaller Than 1.988 Inches
- Q&A: Wiring diagram for Battery Isolator
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements
- Article: Hand Winches
- Article: Testing Trailer Brake Magnets for Proper Function