Recommended Trailer Hitch for 2018 Volvo XC90

Question

Question:

hitch for volvo xc90 2018. Do u have ? thanks

asked by: George R

0

Expert Reply:

For your 2018 Volvo XC90, I recommend the Curt Trailer Hitch Receiver # C53HR. This Class III hitch is confirmed to fit your vehicle and will provide a 2 inch receiver opening for hitch-mounted accessories or ball mounts for towing.

I have attached the installation details so you can see exactly what the process entails. All the necessary hardware is included.

If you are looking to do any towing, I recommend the Vehicle Wiring Harness Kit # C59496. This is a universal, hardwire kit that will install a 4-Way connector at the rear of your XC90 to connect with and power your trailer's signal lights. A circuit tester is also included to help with installation. I have attached the installation instructions that you can use for reference.

To tow a trailer, you will also need a ball mount. I have attached an article that explains how to choose the best one for your setup, along with a link that will take you to our available selection.

expert reply by: Chris R

0

Answer 1

I recommend the Curt Trailer Hitch Receiver - Custom Fit part #C53HR for the 2019 Volvo XC90 because of it's concealed cross tube design for a nice clean looking install. The only portion of the hitch that is visible once installed is the square…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Recommended Trailer Hitch for 2018 Volvo XC90

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching