Can 42 Inch Long Coiled Safety Cables be Used in Place of 30 Inch Long Chains

Question

Question:

My vintage travel trailer has a very short tongue. My existing chains are only 30 inches long. Can I use a 42 inch long cable or will it be too long? I would like to have the cables.

asked by: Vince C

0

Expert Reply:

Since the Curt safety cables # C80176 are coiled the extra length will not be a problem. The coiled design will keep them off of the ground! I have linked a video review below of these cables for you.

expert reply by: Michael H

0

Answer 1

To get the cables long enough, you will need to go up a size larger than 50 inches, since a 50 inch version is not available. The next closest size would be 64 inches. I recommend the Roadmaster Single Hook, Straight Safety Cables, #RM-645. These…

view full answer...

Answer 2

You would want to weld the Brophy Safety Chain Mounting Bracket part #MB38 to your trailer, then you would use the quick link part #C82932 to attach the safety chains part #C80176 to your trailer.

view full answer...

Answer 3

Using cables such as #C80176 in place of chains is no different than using chains. You would still cross the cables under the tongue so that they will catch the tongue should the trailer come off of the ball. The cables are steel underneath the…

view full answer...

Answer 4

I have attached a photo for you below that shows which way the s-hooks should face when attached to the safety chain loops on a trailer hitch. The photo example is using the Curt Single Hook, Coiled Safety Cables with S-Hooks part #C80176 for…

view full answer...

Answer 5

Zinc plated screws are going to be the best option for use with aluminum to resist galvanic corrosion. This corrosion you are referring to is from two dissimilar metals reacting so you want to use the most similar metals when installing your E-track…

view full answer...

Answer 6

The correct B and W Turnoverball Gooseneck for your 2018 Ford F-250 is the part #BWGNRK1116. I attached an install video for this for you to check out as well on a similar 2018 Ford F-250.

view full answer...

Answer 7

You will not have any issues with the O2 sensor on your 2019 Ford F-250 Super Duty interfering with the B&W Turnoverball Gooseneck Hitch #BWGNRK1116 installed. If you take a look at the included video of this hitch being installed on a similar…

view full answer...

Answer 8

The B&W Turnoverball Underbed Gooseneck Trailer Hitch with Custom Installation Kit #BWGNRK1116 that fits a 2019 Ford F-350 Super Duty is only designed to be installed on vehicles without the prep kit, and B&W has said they cannot guarantee…

view full answer...

Answer 9

You can use safety cables instead of chains if your trailer is under the weight rating of the cable. The safety cables are made from nylon coated steel. I do not recommend using the Curt 7500 lb rated safety cable part #C80176 because that would be…

view full answer...

Answer 10

We have some 40 inch cables from Dutton-Lainson #DL20119. These are the shortest safety cables that we have. We do have shorter safety chains; the shortest is #2118-605-04 at 27 inches. I have linked the safety chains and cables for you.

view full answer...

Answer 11

The Curt Single Hook, Coiled Safety Cables with S-Hooks #C80176 has the weight capacity of 7500 lbs rated on using both safety cables. Individually, they would logically be 1/2 that capacity but using only one cable is not recommended so they are not…

view full answer...

Answer 12

Yes, it is perfectly fine to use a bolt to attach the safety chains of your trailer. I would recommend taking the chains to your local hardware store and getting the largest diameter Grade 8 bolt that will fit into the chain links.

view full answer...

Can 42 Inch Long Coiled Safety Cables be Used in Place of 30 Inch Long Chains

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching