Tail Light Converter to Combine Separate Stop and Turn Lights for Trailer
Question:
Need circuit protector for a motorcycle trailer. Need 4 wire + ground to the trailer tail, stop, lturn, rturn, gnd. Please recommend a unit.
asked by: Jim O
Expert Reply:
In most trailer wiring the stop and turn light signals are combined into one circuit for each side of the trailer. 4-pole wiring uses a yellow wire for the combined left-hand stop/turn signal and a green wire for the right side. 7-way wiring also combines these light functions. You can refer to the linked article on trailer wiring.
If you are looking to connect a motorcycle's separate stop and turn lights to a trailer whose lighting is combined you can use Roadmaster part # RM-732. This converter takes in the separate signals from the motorcycle and combines the stop/turn circuits at its output.
At the converter's output side you will need to splice in a vehicle-side 4-pole connector # C58044 to match your trailer. Mount the converter in a safe protected spot on the vehicle and carefully wrap all splices with electrical tape. Note that your running (tail) light wire on the bike bypasses this converter completely; it connects directly to the 4-pole's brown wire.
If I have misunderstood your need please reply via email to clarify.
Products Referenced in This Question
Roadmaster Brite-Lite Wiring Converter
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Tail Light Converter
- Universal
- Roadmaster
more information >
Product Page this Question was Asked From
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 5 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Tonneau Cover
- Shop: Bestop Supertop for Truck Collapsible Bed Cover
- Shop: Nerf Bars - Running Boards
- Shop: Mud Flaps
- Shop: WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
- Shop: Westin PRO TRAXX Oval Nerf Bars - 4" - Black Powder Coated Steel
- Shop: Westin PRO TRAXX Oval Nerf Bars - 4" - Black Powder Coated Steel
- Search Results: mud flaps
- Search Results: trailer turn signal lights
- Search Results: rear bumpers
- Shop: Trailer Hitch
- Shop: Vehicle Tow Bar Wiring
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Trailer Wiring
- Shop: Roadmaster Brite-Lite Wiring Converter
- Search Results: 4 flat wiring
- Shop: Hopkins 4-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends
- Shop: Roof Rack
- Q&A: What Parts are Needed to Convert a Toyota Tundra with a 4-Way Connector to a 5-Way Connector
- Search Results: 6 way wire
- Search Results: wire
- Search Results: 6 pin plug
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class