Roof and Bike Rack Recommendation for 2013 Mazda 3 5 door Hatch

Question

Question:

This Rola rack is on my short list, Im just wondering whats available for compatible wheel on bike racks. It looks like all the related products are fork mount. Car is a 2013 Mazdaspeed 3

asked by: Andrew M

1

Helpful Expert Reply:

For a bike rack that will fit the Rola rack 59833 you referenced and allow you to keep your front wheel installed on your bike you would want the Thule # TH599000.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Thule ProRide, part #TH598004 will fit your factory rack using the included clamp adapter kit. This is a frame mount that will mount to the downtube or crosstube of your bike. If you'd rather have a wheel mounted rack, the Thule part…

view full answer...

Answer 2

Yes, the Thule UpRide Rooftop Bike Carrier #TH599000 will work on the factory crossbars of your 2019 Buick Encore, which has a crossbar spread of 27-1/2 inches. You should be able to open up your rear hatch door without any problems, but you can take…

view full answer...

Answer 3

I have good news, there won't be an issue mounting 2 of the Thule Upride #TH599000 side by side on your roof as long as you have enough crossbar space to do so; considering that you're not driving a passenger car with limited space, you…

view full answer...

Answer 4

The Thule UpRide Roof Bike Rack #TH599000 will work perfectly on your existing Thule Square Crossbars. This rack includes mounting hardware that will clamp around square, round, or aero-style crossbars without having to use an integrated T-slot. I…

view full answer...

Answer 5

The Thule UpRide Roof Bike Rack #TH599000 referenced in your question will fit T-tracks that measure 20x20 mm. I recommend taking a quick measurement on your VW factory crossbars to see if its built-in channel matches this dimension. Otherwise, the…

view full answer...

Answer 6

For a Rola Roof Mounted Bike Rack to fit the Rola Roof rack 59832 you referenced you would want the Thule Upride Roof Bike Carrier #TH599000. This bike carrier would not require you to remove the front wheel. The 59832 you referenced has a crossbar…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Roof and Bike Rack Recommendation for 2013 Mazda 3 5 door Hatch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching