Replacement Extang Tonneau Cover for 2006 Dodge Ram Pickup With 6-Foot bed

Question

Question:

I have an extang cover but it is weathered, I am currently looking for a replacement??? Please advise on what I should get, I dont know where the ID number is located for the cover.

asked by: Greg T

0

Expert Reply:

We have four different replacements for covers that fit a 2006 Dodge Ram with a 6-foot bed, though you would need some information about your current cover to choose the correct one.

Cover # EX37770 is the replacement for the Extang FullTilt SL Soft Tonneau Cover - Snapless J-Strip - Hatch Style - Vinyl # EX38770.

Cover # EX49770 is the replacement for the Extang Express Soft Tonneau Cover - Velcro - Roll Up - Vinyl # EX50770.

Cover # EX13770 is the replacement for the Extang Tuff Tonno Soft Tonneau Cover - Snapless J-Strip - Roll Up - Vinyl # EX14770.

Cover # EX1770 is the replacement for the Extang BlackMax Soft Tonneau Cover - Snap On - Roll Up - Vinyl # EX2770.

expert reply by: Kyle S

0

Answer 1

I am happy to determine the replacement cover for you but I would need the serial number off of your older Extang cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side front…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Replacement Extang Tonneau Cover for 2006 Dodge Ram Pickup With 6-Foot bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching