Will the Draw-Tite Hitch # 75210 fit a 2006 Dodge Sprinter with a Factory Step Bumper

Question

Question:

Does it matter which rear bumper I have on my sprinter for this hitch to work? Currently I have the factory rear step bumper. Thank you

asked by: Kevin C

0

Expert Reply:

The Draw-Tite Class III 2 Inch Hitch, part # 75210, is for a 2006 Dodge Sprinter with a 140 inch or 158 inch wheelbase and either single or dual rear wheels. It will not fit the 118 inch wheelbase vehicle.

To fit the Sprinter with the dual rear wheels the width between the frame rails will need to measure 35-1/4 inches.

On the 2006 Dodge Sprinter, the Draw-Tite hitch # 75210 will fit if you have the factory bumper that is molded to match the design of the vehicle. It will not fit your Sprinter if you have a metal step bumper that sticks out from the vehicle.

If the Draw-Tite hitch # 75210 will work for your vehicle you will also want the following items for towing.

Convert-A-Ball Ball Mount, part # AMSC2
Tow Ready 1-7/8 Inch Hitch Ball, part # 19260, or Tow Ready 2 Inch Hitch Ball, part # 19247
Hidden Hitch Pin and Clip, part # PC3
Wiring Harness, part # C59496 or Tow Ready T-One Wiring Harness, part # 118381, if you have a factory tow package.

I am including a link to the installation instructions on the Draw-Tite hitch for the 2006 Dodge Sprinter.

expert reply by: Jeff D

0

Answer 1

I apologize for any confusion. With these 2005 Sprinters there are many different versions, and sometime our vehicle listing can get a little crowded/confusing. The draw tite hitch #75210 will be a good fit for your 2005 Sprinter 158"…

view full answer...

Answer 2

I spoke with my contact at Draw-Tite, and he said that as long as your Sprinter frame is 41 inches wide outside to outside and the wheel base is more than 118 inches long, the Draw-Tite Max-Frame Trailer Hitch, item #75210, will fit your 2006 Dodge…

view full answer...

Answer 3

The spare tire retainer would almost certainly interfere with installing the #75210, but we do have a hitch that is positioned a bit differently so it would fit perfectly. The Curt #13250 class III hitch will avoid the spare tire retainer, as shown…

view full answer...

Answer 4

Yes, we have the Draw Tite hitch part #75210 as a confirmed fit for your 2004 Freightliner Sprinter 2500 that has the factory step bumper. Draw Tite states that on vehicles with factory step bumper, bumper mounting brackets will be re-attached at…

view full answer...

Answer 5

You can put a maintenance charge on your trailer battery with the 12 volt accessory circuit of the 7-way. The 1:00 position of your 7-way carries this circuit. You would just need to run a length of 10 gauge wire like part #10-1-1 (sold by the foot),…

view full answer...

Answer 6

Thule does recommend using glue when installing the Promaster Bike Rack part #TH302013 but there is no drilling required to install it. The recommended glues are Dekalin MS 5, SIKA 252 or Terostat MS937

view full answer...

Answer 7

When it comes to installing a 7 pin connector on your 2021 Ford Bronco with LED Taillights you first will need The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C42WR. Next you will need The Universal Installation Kit…

view full answer...

Answer 8

The Replacement Body Frame for Thule Elite Van XT Bike Rack #TH52VK that you referenced actually fits both the version of the Thule Elite Van XT Bike Rack that fits the Sprinter vans part #TH302043 as well as the version that fits the ProMasters…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The 1-5/16" Hellwig Adjustable Big Wig Rear Anti-Sway Bars are designed for 2WD #HE97MR or 4WD #HE94FR versions of your 2021 Ford F-250. These are both designed for trucks which have a stock ride height. Hellwig does offer their 2" Lift…

view full answer...