Will Tandem Hanger Kit part # APT5 Work With Trailer that has Tandem 3,500 lb Trailer Axles
Question:
I have two 3500# axles that came with springs already attached. Both are Dexter. Springs are double eye. Im building a car hauler. I will be using 15inch wheel and tire combination. I believe I need to buy your hanger kit apt5. My question is do the springs I have make a difference in the hanger kit i purchase?
asked by: B
Helpful Expert Reply:
The tandem axle hanger kit part # APT5 that you referenced would fit and work fine with your trailer's new axles that come with springs. It would be just a matter of mounting the hangers in the correct location for the spring dimensions.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Inner Member Assembly for UFP A 60 Surge Brake Coupler
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Use a Roof Rack (Like a Boss)
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Q&A: Using NOCO 2 Bank Charger With Parallel Batteries in Truck
- Q&A: Replacement Lift Motor for Fantastic Vent in 2002 Teton 5th-Wheel Trailer
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: How To Charge 12v Batteries Wired in Parallel
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Double-Eye Trailer Suspension System Review
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: Most Popular Wheel Bearings