How to Determine What Size Wheel Bearing and Seals Will be Needed for Trailer Axle
Question:
Hi - We need to rebuild bearings on a rear axle for a 1967 boat trailer. We ordered the 2000 lb kit but the rings arent the same size. Obviously we ordered the wrong part, but we need to get the right one. The outside circumference of the rings we ordered is 2. The outside circumference of the rings we are trying to replace is 2.5. What should we order? Thank you.
asked by: Michael H
Expert Reply:
There is a couple of way to determine which wheel bearings and grease seals you will be needed for a trailer axle.
First, checking the numbers on the wheel bearings and seal will allow you to select the correct parts for your axle. However, in some cases these numbers may have worn off. For this a measurement of the inner diameter of the bearings and both inner and outer of the grease seal will be needed.
Using a digital calipers like, # PTW80157, you can measure the I.D. of both inner and outer bearings and if need the bearing and seal seating area on your trailer's spindle. Once you have this information, click on the attached link on bearings and seals. This link will take you to our product page that will display all the wheel bearings and seals we carry. Either match the bearing/seal numbers or the measurements to find the correct bearings and seals for your application.
I have attached a photo that displays the areas the will need to be measured on the bearings, hubs, and spindle.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Trailer Hitch
- Shop: Hollywood Racks Destination E Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Article: Most Popular Wheel Bearings
- Shop: Nerf Bars - Running Boards
- Search Results: hr4500
- Video: DeeZee NXc Running Boards Installation - 2022 Dodge Durango
- Video: DeeZee NXc Running Boards Review DZ16201-16210
- Shop: AeroTread Running Boards w/ Custom Installation Kit - 5" Wide - Aluminum - Polished Stainless
- Shop: DeeZee NXc Running Boards w Installation Kit - 5" Wide - Aluminum - Stainless Steel and Black
- Article: Trailer Wiring Diagrams
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: How to Measure to Determine the Correct Grease Seal for a Trailer Spindle
- Shop: Trailer Wiring
- Search Results: bearing and seal kits
- Video: Excalibur Tires and Wheels 319EZ Review
- Search Results: axle dust cap
- Article: How to Measure a Trailer Axle
- Search Results: 12x2 brakes
- Search Results: 5000 lbs axle
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Q&A: Comparing Trailer Brake Assembly # 23-105 and # 23-105-09
- Search Results: castle nut
- Search Results: wheel bearing kit
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Westin Platinum Series Oval Nerf Bars Review
- Video: Aries RidgeStep Running Boards Review
- Video: Aries AeroTread Running Boards Installation - 2014 Jeep Grand Cherokee