Troubleshooting Movement Between Trailer Coupler and Hitch Ball On Weight Distribution System
Question:
I have 2016 Jayco Eagle Travel Trailer with a 14,000# equalizer hitch. The trailer has the Atwood coupler and equalizer has the 2 5/16inch ball. When I stop and then pull away, say from a stop sign I hear looseness and clunking noise between coupler and the ball more than I think there should be. I took a new ball and slide it in and secured it. Seemed to fit right. Is there anything in there that would allow wedge to move when apply brakes and stop? I would order a new coupler from you if that would or might likely help. The existing one is not very old and I do keep the ball greased. Please advise!
asked by: Bob C
Expert Reply:
There will be some play with any ball and coupler because the trailer has to rotate. However, it sounds like you have too much movement because putting another hitch ball in place seemed to fit better. I recommend changing the hitch ball in your weight distribution system if it is no longer the correct size.
If the coupler you have is an underslung coupler that may have something to do with the noise as well. We do have weight distribution systems that are specifically designed for underslung couplers because the angle is different. You may need to adjust the head tilt on your weight distribution system for better connection.
You may want to consider the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - Underslung - 15K GTW, 1.5K TW # BXW1503.
Products Referenced in This Question
Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - Underslung - 15K GTW, 1.5K TW
- Weight Distribution Hitch
- WD With Sway Control
- Severe Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Blue Ox
more information >
Product Page this Question was Asked From
A-Frame Trailer Coupler - Underslung - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14K
- A-Frame Trailer Coupler
- Standard Coupler
- Weld-On
- 14000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Thumb Latch
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Roof Rack
- Shop: Bright Way Deep Cycle RV Battery - AGM - 6V - 400 Ah
- Shop: BringIt SwitchBack SOLO Down Tailgate Camera - Ford Super Duty 2017-2022
- Shop: Bright Way Deep Cycle RV or Golf Cart Battery - AGM - 6V - 220 Ah
- Shop: Go Power AGM RV Battery - Deep Cycle - Group 27 - 6V - 224 Amp Hour
- Shop: A-Frame Trailer Coupler - Underslung - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14K
- Video: Bright Way Deep Cycle Battery Review
- Video: Review of BringIt Tailgates Backup Camera - SwitchBack Solo Tailgate Camera - BR75ZR
- Article: Rooftop Cargo Carriers
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Wiring Harness Recommendation for a 1999 Isuzu NPR
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2
- Video: Roadmaster InvisiBrake Braking System Installation - 2021 Jeep Wrangler
- Search Results: 68149
- Shop: Trailer Wiring
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Search Results: dust cap
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Roadmaster Universal Diode Wiring Kit Installation - 2021 Jeep Wrangler
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Shop: Suspension Enhancement
- Video: Brake Buddy Classic 3 Portable Supplemental Braking System Installation - 2009 Jeep Wrangler Unlimit
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights