Sway Control Brackets Interfere with Frame Mounted Accessories
Question:
My battery mounts/angle iron interfere with the 4inch load bar mount spacing on the tru track system. Is it ok to mount the system closer to the ball...as in 3? This is with the understanding that the leverage of the bars will be reduced.
asked by: Matthew G
Expert Reply:
The recommended position of the sway control brackets on the Curt TruTrack Weight Distribution System w/ Sway Control part # C17500 is 4" in from end of spring bar. If you moved the sway control bracket 3" in from end of spring bar, you risk the chance of the spring bar falling out while making a tight turn. If you moved the sway control brackets closer to the ball mount, you risk minimizing the performance of the system and it's ability to evenly distribute weight. Therefore I cannot recommend you stray from Curt's recommendation of 4" in from end of spring bar.
I recommend relocating your battery to a new suitable location that will not interference with the weight distribution system using a battery relocation kit like the TorkLift HiddenPower part # TLA7726 or installing a weight distribution system that allows for a greater degree of adjustability of the sway control brackets such as the Fastway e2 Weight Distribution w/ 2-Point Sway Control part # FA94-00-1061. The sway control braclets included in this kit can be positioned anywhere from 27" - 30" back from center of coupler.
Products Referenced in This Question
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 2-5/16" Hitch Ball - 10K GTW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 700 lbs
- 800 lbs
- 900 lbs
- Fastway
more information >
TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box
- Battery Boxes
- Camper Battery Box
- 12V Batteries
- Group 24 Batteries
- Group 31 Batteries
- Custom Under-Vehicle Mount
- Black Plastic
- TorkLift
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement for AL-KO 1530116 and 1530117 Brakes
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Closest Metric Replacement Tire Size for 7.00-15 Tire on Livestock Trailer
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle