Recommended Disc Brakes In Stainless Steel For Boat Trailer With 3500 lb Axles
Question:
I need 4 brake kits for my boat trailer. I have now, caliper = Tie Down 4630 / Rotor = TDE 46245 / seal = 171255. Inner axel bearing size 1 3/8, outer axel size 1 1/16. Would like to replace with stainless if possible but coated steel and aluminum would work also. Thanks
asked by: J. P
Expert Reply:
I have just what you are looking for. I recommend the Kodiak Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs # K1HR35S. This kit will fit your spindles based on the dimensions you gave and will include all the parts you need.
Another option is the Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs # K2HR35DS. This kit does not come with the bearings, seal, or cap. I recommend the Bearing Kit # BK2-100 and the Grease Caps # RG04-020.
I recommend using the LubriMatic Marine Trailer Wheel Bearing Grease # L54FR for this installation.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Marine Bearing Grease
- Calcium Sulfonate
- 3 oz
- LubriMatic
more information >
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Disc Brake Kit for 2014 EZ Loader Boat Trailer
- Q&A: Spindle Dimensions of a 3500 lb Axle
- Q&A: Recommended Replacement Snap-Ring Swivel Jack for Ranger Boat Trailer
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Curt Echo Full Review