bing tracking image
Customer Service My Orders
Q & A Icon

Timbren Axle-Less Suspension System with Lift for Single 5200-lb Axle Trailer  

Question:

We are looking to swap out a 30+ year old axle and like the Timbren design. Which Parts will be need, want to get the 4inch lift 5200# Axle, with e. Brakes and rim bolt Pattern 6.5 x 8. Thanks

0

Expert Reply:

Timbren axle-less trailer suspension # TASR5200S03 is rated for 5200-lb applications, has 4-inch lift spindles and includes brake flanges. With this kit you can use 8-on-6-1/2 bolt pattern hub/drums that use inner bearing # 25580 and outer bearing # 15123 or # LM67048.

You can use galvanized hub/drum # 8-219-50. For electric brakes you can use left- and right-hand kit # AKEBRK-7-SA which are self-adjusting and that work with 14-1/2, 15, 16, and 16-1/2-inch wheel diameters.

Some trailers may require reinforcement to use the Timbren system. If your trailer does not have a cross member above the spot where you want to install the Timbren system, you may need to reinforce the frame. You can accomplish this three ways. First, you can retrofit the trailer with a cross member. Second, you can build out the trailer frame. Third, you can use 2" x 3" steel tubing to connect the 2 Timbren suspensions together using the built-in hole on each unit.

expert reply by:
0
Adam R
Ask The Experts a Question >>

Products Referenced in This Question






Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for TASR5200S03
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>