Trailer Hitch and Bike Rack Recommendations for a 2007 Toyota Camry
Question:
Can i get a hitch with a 2 inch receiver for a 07 Camry? I have a bike rack with 2 inch
asked by: Tim E
Expert Reply:
I have a couple of solutions for you but there isn't a 2 inch hitch available for the 2007 Toyota Camry. One solution is to use a hitch expander such as # MHTAD. While this does allow you to use a 2 inch accessory with a 1-1/4 inch trailer hitch. There is 1 side effect; the use of an expander reduces the tongue weight capacity of a trailer hitch by 50 percent. You will also need a hitch pin # PC2.
So for Draw-Tite hitch # 36416 the tongue weight capacity would be reduced to 150 pounds. The combined weight of the bike rack and the bikes could not exceed 150 pounds.
Option 2 is to replace the bike rack you have with a version that is compatible with a Class II, 1-1/4 inch trailer hitch. If you can tell me how many bikes and what types they are I will be happy to make some recommendations.
We have Curt # C18085 two-bike rack. These racks are inexpensive, versatile (they hold the bikes are the wheels), and light weight. Will hold 2 bikes weighing up to 45 pounds. I linked a couple of videos of these racks for you.
Products Referenced in This Question
Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Bike Lock
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- CURT
more information >
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 7-1/4 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- Brophy
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 1-1/4" to 2" Hitch Adapter For Bike Rack On A 2011 Toyota Camry With The Draw-Tite 36416 Hitch
- Q&A: Recommended Hitch For A 2011 Toyota Camry LE V6 With Dual Exhaust
- Q&A: Can Thule Hitching Post Pro Fit on 2011 Toyota Camry
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Will a 1Up Quickrack Trailer Hitch Mount Bike Rack Fit Draw-Tite Trailer Hitch # 36416
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Difference In Factory Lifestyle Hitch And Frame Mounted Hitch 2021 Kia Seltos
- Q&A: Replacement Boat Trailer Hubs for #82655
- Q&A: Removal of Black Plastic Covering on Underside of 2011 Toyota Camry to Install Hitch
- Article: Flat Towing Package for 2014-2018 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Article: What Do I Need To Tow A Trailer?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting Brake Controller Installations