Power Inlet Availability for Cruiser RV

Question

Question:

I am looking for the power inlet assembly for my camper. It is a Cruiser RV model V24FK I have 3 wires to hook to it a green, a black and a white. do you have any that will work? any help would be appreciated.

asked by: Ken R

0

Expert Reply:

We have a few different styles of power inlets for RVs. The part # A10-50INBKVP that you referenced is a 50 amp style connector. The other style is a 30 amp like part # 277-000138. This is the more popular style so it would probably be what you'd need. But you'd need to first determine the amperage draw needed for your trailer.

expert reply by: Jameson C

0

Answer 1

Since your generators already have the inverters built in there is no need to run them through the surge protector. So adding a secong 30 amp connector to your camper that ties in to the electrical system after the surge protector would be a great…

view full answer...

Answer 2

Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.

view full answer...

Answer 3

The largest 30 amp male twist inlet is the part #431861 which is overall 3-1/2 inch by 3-1/2 inch. The hole behind our current access door might actually be smaller though than what you mentioned so maybe take it off and see how big of a hole you…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 7

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 8

I spoke with my contact at Progressive Dynamics and they informed me that the Lithium Converter for WFCO RV Power Centers part #PD4655LIV does work as an upgrade for the Parallax 7355. It has the same housing as the Replacement Converter for…

view full answer...

Answer 9

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...

Answer 10

To replace your WFCO WF-8750P power center I recommend the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K. This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily…

view full answer...

Answer 11

Having the extra amperage of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has no down side. You'd at worst just have more power available than you'd need.

view full answer...

Answer 12

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Power Inlet Availability for Cruiser RV

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching