Fulton Fold Away Hinge Kit 3x3 Fit on Trailer Tongue that is 7-3/4 inches Long
Question:
I am wanting to order the Fulton fold away hinge kit bolt on and dont know which one I need to order. I dont know how long the entire coupler is and if it will fit on the 3x3 section of the tongue which is 7 3/4inch or if I need to go up to another size as seen in the pictures. The blue tape is the end of my master cylinder for the surge brakes so I would assume I couldnt go any farther up than that. The bigger section is 3 1/2inch across the top and 3 7/8inch down the side. I couldnt get the pictures to upload so if they didnt work let me know and I can email you some. I appreciate the help. Thanks
asked by: Sean
Expert Reply:
You would need to install the Fulton Fold-Away Coupler Hinge Kit # FHDPB330301 on the smaller 3 inch by 3 inch section of the tongue on the coupler. It would fit on your trailer that has a length there of 7-3/4 inches and would work well. It would add a bit of length to the tongue when folded out, but it still would fit and work just fine.
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Bolt-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Trailer Tongue - Weld On - Up to 5,000 lbs
- Shop: Adapter Sleeve for Fastway and Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers
- Video: Fulton Folding Tongue - Coupler Hinge Kit - FHDPW330300 Review
- Q&A: Recommended Adapter To Extend 3" x 3" Boat Trailer Tongue
- Q&A: Swing-Away 2-Inch Drum Brake Actuator Coupler to Replace Discontinued Fulton A60
- Q&A: Folding Hinge for 2 x 2 Inch Trailer Tongue
- Shop: Spindle Grease Seal Set for 15123 Inner Bearing and 1.980T or 1.938 Bearing Buddy
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Seals - BB60011 Review
- Video: Bearing Repacking and Grease Seals Installation
- Video: Demco Electric Lockout Hydraulic Brake Actuator Installation
- Q&A: Compatibility of the Bearing Buddy Grease Seal Set with Posi-Lube Spindles
- Search Results: 2.5 hitch extension
- Search Results: fulton
- Search Results: axle wear sleeve
- Video: Titan Trailer Brakes T4890700 Review
- Video: Titan Hydraulic Brake Lines and Fittings Review
- Video: Titan Trailer Brakes T0980100 Review
- Q&A: Parts Needed to Install Titan Flexible Brake Line Tubing Clip # T0776400
- Q&A: How Does Clip for Titan Flexible Brake Line Tubing # T0776400 Install on Trailer Frame
- Q&A: Replacement Clip Recommendation for Titan Flexible Brake Line Tubing
- Search Results: brake hose kit
- Search Results: hydraulic brake hose
- Search Results: brake line kits
- Search Results: brake fittings