How To Determine If Brakes And Hubs Will Fit Tandem Trailer
Question:
Hello, I have a 2 Axle about 3500 pounds each flatbed trailer 3/16inch traction steel deck and 2inch ball. Trailer is 8foot by 14. Extended tongue. About 26inch from the ground to the deck, axle is 2 3/8 in diameter, tire size 20.5 x 8.0 - 10 The trailer is similar to a snowmobile trailer. I was looking for these parts: Electric Trailer Brake Kit - 7inch - Left and Right Hand Assemblies - 2,000 lbs - AKEBRK-2, Trailer Hub and Drum Assembly for Electric Brakes - 2,000-lb Axles - 5 on 4-1/2 - 8-257-5UC3 and the Engager Trailer BreakAway Kit with Charger and Tester - 20099 My question is if these parts would fit the set up I have. Thank you for your time.
asked by: Ricardo
Expert Reply:
The # AKEBRK-2 brake assemblies will work with the Trailer Hub and Drum Assembly, part # 8-257-5UC3. The dimension of 2-3/8 inches you said your axles measure is for a 3,500-lb axle. The problem may be that the brakes and drums do not fit your spindles on your axle. You will need to do some measuring to see if they will work.
I recommend using a digital caliper like part # PTW80157. You will want to measure the spindle in the locations noted in the attached drawing. After you get the measurements let me know what you have and I will make recommendations that will work for your axles.
The Engager Trailer BreakAway Kit with Charger, part # 20099 will work with your trailer. I have attached a link to an installation video for the BreakAway kit you can check out.
Products Referenced in This Question
Hopkins Engager Push-To-Test Trailer Breakaway Kit w/ Built-In Charger - Side Load - 7" Wire
- Trailer Breakaway Kit
- Kit with Charger
- Side Load
- Single-axle
- Tandem-axle
- LED Tester
- Hopkins
more information >
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Grease Seal 225255UC for 2015 Wesco Trailer
- Q&A: Can Dexter E-Z Flex Suspension Kit Replace Dexter 13-10 Equalizer
- Q&A: Replacement for a TDE LP8500 Boat Trailer Acuator
- Article: How to Survive the Winter In Your RV
- Q&A: RV Slide Topper Awning For A 154 Inch Slide Out Box
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring Harness Recommendation for 2017 Lexus RX 350 with Towing Package
- Q&A: Does The LaSalle Bristol RV Roof Membrane Ship Folded Or Rolled Up
- Q&A: Recommended Replacement Hubs For BT-150 Trailer Idler Hubs
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function