Shank for Curt TruTrack Weight Distribution System that Fits a 2-1/2 Inch Trailer Hitch Receiver
Question:
I have a Curtis hitch, your part #C17500. My shank is 16 inches long, and 12 inch drop. My worry is that I have an 2.5 to 2 inch adapter. Do you have an equivalent shank that is 2.5 and will work with the Curtis hitch?
asked by: Iddo
0
Expert Reply:
I've attached a link of all the 2-1/2 inch shanks that will fit your Curt TruTrack Weight Distribution System # C17500.
You can look for the drop you need. The Reese Titan # RP54977 has a 5-3/4 inch drop.
expert reply by:
Charles S
0
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement for AL-KO 1530116 and 1530117 Brakes
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Closest Metric Replacement Tire Size for 7.00-15 Tire on Livestock Trailer
- Q&A: Stamp On 2005 Ford F-150 Says 9,900 Lbs but How Much Weight Can I Tow
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Are Replacement Spring Bars Available For The Curt TruTrack 4P Weight Distribution System # C74RV