Installing an Electric Brake Controller in a 2007 Chevrolet Uplander with Tow Package
Question:
Does your GM wiring harness work for my 2007 Chev Uplander with a towing package or do you sell one. I wish to add a 7-pin hook-up with brake controller and would like to find the parts available. My van originally came with a factory wire harness adapter to plug in under the dash, but I can not find that harness! Thanks, Dave
asked by: David H
Expert Reply:
From my research your 2007 Chevrolet Uplander does not have the wiring for a 7-way trailer connector or a brake controller already installed. So the # 3015-P will not work for you.
In order to install a brake controller, like the Prodigy P2 # 90885 you'll need to hardwire it under your dash using our # ETBC7 kit. I've linked a video showing you this process on a 2006 Uplander. It's a different brake controller but the process will be the same.
You'll also need a 4-way trailer connector before you can use the # ETBC7 kit. If you don't already have one you can install # 118396.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Installing Electric Brake Controls on a Chevy Uplander, Pontiac SV6, Buick Terraza or Saturn Relay
- Q&A: Installing a Brake Controller from Scratch on a 2005 Chevy Uplander
- Q&A: Which Wire is the Reverse Wire on the 7-Way Molded Trailer End Connector
- Q&A: Recommendation for Complete Towing Setup on a 2007 Chevrolet Uplander 3.9 Liter
- Q&A: How to Provide Power to Trailer Reverse Lights
- Article: Testing Brake Controls
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Article: Trailer Wiring Diagrams
- Article: Pintle-Hitches
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Brake Controller Installation: Starting from Scratch