Recommended Hitch Mounted Cargo Carrier For 2012 Mazda 5 With 1-1/4 Inch Trailer Hitch
Question:
I am looking for a lightweight preferably aluminum cargo carrier for a 1 1/4inch receiver. There seem to be slim pickings for the baby receiver size. What do you recommend?
asked by: Daniel
Expert Reply:
The hitch mounted cargo carriers we offer for a 1-1/4 inch receiver opening are not made of aluminum.
For your Class I trailer hitch receiver, We have three great options:
The 17 X 46 Curt Cargo Carrier # C18145 has side rails and an open-floor design that will prevent grime buildup. It would be best for carrier larger items that would not fall through the slats. This carrier weighs 28 pounds.
The 19X 47 Curt Carrier # C18110. It does not have side rails but includes an easy clean mesh floor. This carrier has an angled 3-3/4" rise shank to help with ground clearance. This carrier weighs 30 pounds.
Finally, the 20 X 47 Reese Carrier # 63155 has side rails and a mesh floor. This one has a shank rise of 3". This carrier weighs 44 pounds.
All of of these carriers have rugged steel construction.
Products Referenced in This Question
20x47 Reese Cargo Carrier for 1-1/4" Hitches - Steel - 300 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 21 Inch Wide
- Standard Duty
- Fits 1-1/4 Inch Hitch
- 49 Inch Long
- Steel
- Reese
more information >
19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Standard Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Product Page this Question was Asked From
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Heavy Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: How to Determine Correct Rise or Drop for Blue Ox SwayPro Weight Distribution System
- Article: Trailer Maintenance Schedule
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Leaf Spring Replacing Dexter 072-078-00 For 4,400 lb Axle
- Q&A: Does Primer Need to Be Applied to Aluminum Roof Before Applying Alpha Systems 4034 Roof Coating
- Q&A: How Can I Remove RV Roof Coating From The Side Of My RV?
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?
- Q&A: Height of Timbren Rear Suspension Enhancement System # TGMRCK25D
- Article: Rooftop Cargo Carriers
- Article: How to Measure for Trailer Hitch Drop
- Article: Cargo Tie-Down Methods
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit