Need Tube Dimensions On A Caster Wheel For A 2 Inch O.D. Tube On A Trailer Tongue Jack
Question:
Hi, I need a caster wheel for a tongue jack. The down tube on the jack is 2 O.D., so I assume the caster I need will have about a 1 5/8 O.D. and then fit inside and secure with the pin. Your products dont have dimensions illustrated, but Im trying to verify that the ones that say for 2 jack will work. I have one caster already that doesnt work because the O.D. is 2 - same as the jack tube so it cant attach. To avoid this, can you please clarify the exact tube diameter dimensions on part #PS1400750340. Thank you.
asked by: James W
Expert Reply:
The tube diameters on the Pro Series 6 Inch, Detachable Caster w/ Pin, part # PS1400750340, is 2 inch inside diameter and 2-1/4 inch outside diameter. The down tube on a 2 inch jack will fit inside the 2 inch tube on the caster.
You will need to make sure that the jack will have the hole in the down tube for the pin on the caster to go through and hold the caster to the jack. Also, both of the casters have a weight capacity of 1,200 lbs. If these casters are used on a jack with a higher weight capacity, the weight capacity will be reduced to the lower 1,200 lb. weight capacity of the caster.
Product Page this Question was Asked From
Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- 2 Inch Diameter Tubing
- Pro Series
more information >
Continue Researching
- Shop: MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet
- Shop: Lippert High-Speed Power Stabilizer Jack - Black Waterproof Switch Kit - 30" Lift
- Search Results: 337199
- Shop: Replacement Manual Crank Handle for Lippert 5th Wheel RV Landing Gear
- Search Results: 108220
- Search Results: insert molding
- Search Results: trim molding
- Shop: MB Sturgis Propane Pigtail Hose - POL x 1/4" Male Inverted Flare - 1-1/4'
- Shop: MB Sturgis Propane Pigtail Hose - POL x 1/4" Male Inverted Flare - 3'
- Search Results: fulton
- Search Results: scissor jack
- Shop: Tire Linc OneControl TPMS w/ Signal Booster for RVs and Trailers - Bluetooth - 4 Tire Sensors
- Shop: Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418
- Q&A: What are the Dimensions of the Outer and inner Tubing of Trailer Jack # PS1401000303
- Q&A: Replacement Handle For Fulton Magnum Swivel Marine Jacks
- Q&A: Determining Correct Replacement Gear Kit For Older Fulton Jack W/ 1-1/8" Diameter Bevel Gears
- Q&A: Are 800 lb and 1,500 lbs Replacement Fulton Trailer Jack Handles Interchangeable
- Q&A: Replacing Flat Plate on Trailer Jack With a Replacement Wheel
- Q&A: Replacement Handle for Fulton Magnum Series Jack
- Q&A: Will the Replacement Bevel Gear Kit for Fulton Trailer Jacks # F0933302S00 Fit a 1,000 Pound Jack
- Video: etrailer Trailer Jack JC-101 Review
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Video: Lippert Solera Slider Slide-Topper Review
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)