Motorcycle Wheel Chock Recommendation that is Removable

Question

Question:

Ive ordered three of the max tow wheel chocks to be used in my enclosed box trailer. It doesnt State anywhere in its description but by looking at the pictures it looks as if you can mount the wheel chocks and remove them from their mounting plate when not needed. Am I correct in this assumption?

asked by: ROBERT W

0

Expert Reply:

The mounting hardware included with the MaxxTow adjustable wheel chock, (DISCONTINUED) MT70075, is designed for a permanent installation. However we do have several wheel chocks that are considered removable because of how they mount.

We have TowRax chock # TWSPWM, # TWSPWC, and # TWSPWC3BT. These chocks have a keyhole shape opening where the large end fits around a bolt head. When the bolt is tightened down on the skinny end it cannot be removed. When the hardware is loosened, the chock can be slid back to slip over the bolt head.

expert reply by: Jameson C

0

Answer 1

The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

view full answer...

Answer 2

The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.

view full answer...

Answer 3

On this page (typically below the product links) there is a helpful link section that will have the install instructions fo the Hopkins Breakaway kit part #20400 that you referenced. I also attached an install video that shows the kit installed as…

view full answer...

Answer 4

We have a online diagram that will help you understand how the break away system is wired into your trailer. It is actually a simple installation. The system splices into the existing trailer wiring. The break away box will have 3 wires coming out of…

view full answer...

Answer 5

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 6

It is possible to use the cam-door lock, #383200, horizontally but it would need to be placed up higher than the midway point to reduce the amount of stress on it when the door is closed. Take a look at the picture I have included that shows this…

view full answer...

Answer 7

There are a few things that you can do that will help with the sway and bounce on your 6 x 10 trailer when you are pulling it with your Chevrolet Tahoe. The first thing you can try to do is tow the trailer level. If the tongue on the trailer is high,…

view full answer...

Motorcycle Wheel Chock Recommendation that is Removable

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching