7-Way Plastic Trailer Connector and the Terminals Needed to Crimp on the Wire

Question

Question:

Just wondering if the plug PK12706 7 wire trailer plug comes with the terminals needed to crimp on the wire, or if I would need those seperately. Thanks for your time.

asked by: Rob

0

Expert Reply:

The 7-Way Plastic Trailer Connector, item # PK12706 does not come with terminals to crimp the wire. You can use terminals although, they are not necessary. Inside the connector there are connection points that secure the wire to the terminals with a screw and clamp.

expert reply by: Amanda

0

Answer 1

The Bargman 7-Way Molded Trailer Wire Connector #50-67-210 that you referenced uses a standard RV style 7-way flat connector on both ends. The socket it would fit would look like the part #PK11893. This style of 7-way is the kind that is very…

view full answer...

Answer 2

All of our RV stereo products, such as the Jensen AM/FM - CD/DVD - USB - Auxiliary - Bluetooth unit #JWM70A are brand new and unused. The units we ship include the manufacturer's written documentation. I personally checked our warehouse stock…

view full answer...

Answer 3

It looks like the Northern Lights 10-2 EX CD SE is 18'-6" long and 8 feet wide, so the Classic Accessories Deluxe PolyPro III Heavy-Duty Truck Bed Camper Cover - 19-11/16' Long #CA80037 is the best choice. This cover will fit…

view full answer...

Answer 4

To make an adapter like you are looking for would require the part #H20043 which is a 7-way with 4 feet of wires that you could then wire to a 7-way male like part #A7WCB. I attached a chart that shows the wiring colors for the #H20043 plus a…

view full answer...

Answer 5

To protect your 2021 Northern Lite truck camper in a high wind cold environment I recommend the Classic Accessories Deluxe PolyPro III Heavy-Duty Truck Bed Camper Cover - 19-11/16' Long Item #CA80037. This is an all season cover that provides…

view full answer...

Answer 6

The two harnesses you mentioned are made by two different companies who have just happen to price things differently. I wouldn't say there's a big quality difference between the #50-67-210 and #TLW6510 but the #TLW6510 is two feet longer and…

view full answer...

Answer 7

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 8

The model number on you Jensen HDMI RV Radio will be on a silver sticker found on the body of the radio as shown in the included picture. You will need to remove the radio to read this sticker. Based on the pictures of your radio it appears that you…

view full answer...

Answer 9

I am not exactly sure what you are asking but when installing the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector part #PK12706 on your trailer you will need to test the wires for function rather than color match. I know it will be easier to…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

7-Way Plastic Trailer Connector and the Terminals Needed to Crimp on the Wire

Product Page this Question was Asked From

Continue Researching