Recommended Weight Distribution System For 2011 Toyota RAV4 Towing 2500-Lb Trailer

Question:

What would be the next best option that doesn't cost so much?

asked by: Craig

Expert Reply:

The best way to find a weight distribution system that is best for you is to first determine the tongue weight of your fully-loaded trailer when it is ready to tow. Then add the weight of any cargo you place behind the rear axle of your towing vehicle. That gives you the total tongue weight to consider. You want that weight to fall near the middle of the range of the weight distribution system you choose.

If your total TW is over 400 lbs. I recommend the Equali-i-zer weight distribution, part # EQ37060ET. This system is designed for tongue weights between 200 and 600 lbs. This system has built-in sway control that helps in windy conditions or when passing big trucks on the highway. This comes with a shank and hitch ball as well. To install the ball you will need a thin wall socket like part # ALL643216.

I have attached our help article on determining tongue trailer weight and common weight distribution questions you may want to check out. I also attached a review video of the Equal-i-zer weight distribution systems for you to look at.

expert reply by: Jeffrey L

Craig

1/6/2017

What would be the next best option that doesn't cost so much?

Jeffrey L.

1/9/2017

The Fastway e2 Weight Distribution w/ 2-Point Sway Control, part # FA92-00-0600 is another nice system that would work for you based on your numbers. This system has 2-point sway control built in and has a tongue weight range of 250 to 600 lbs. The hitch ball is sold separately and requires a 1-1/4 inch shank. For a 2-5/16 inch ball I recommend part # EQ91-00-6100 and for a 2-inch hitch ball I recommend part # EQ91-00-6080.