Trailer Hubs and Bearing Buddies for Trailer Spindles with 1 Inch Diameter
Question:
i have bearing body model #1968ss i need 2 4 stud hub to fit with these the shaft is 1 inch.
asked by: Stephen
Expert Reply:
It sounds like your spindle uses L44643 bearings, There are a lot of hubs that use those bearings and have a 4 on 4 bolt pattern such as # AKIHUB-440-2-1K. However, the 1968 Bearing Buddies are designed to fit a hub that uses outer bearing M-12649 or 07100 which are not common. The hubs that fit your spindle take the 1.98 Bearing Buddies such as # BB1980A-SS or # BB1980A.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Trailer GPS Device for Trailer Installation
- Q&A: Products for Tracking a Stolen Trailer
- Q&A: Battery Life and Charging Time For The Linxup GPS AT3 Tracking Device
- Q&A: How Much is Monthly Service for Linxup GPS Tracking Device
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Winch Repair Kit for Dutton-Lainson Trailer Winch Model DL1602A
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Best Boat Trailer Jacks