Trailer Coupler Recommendation for Gooseneck Trailer to Convert from 3 inch Hitch to 2-5/16

Question

Question:

I have a trailer with a 3inch coupler and want to make it the standard size. How is this possable??

asked by: Dan P

0

Expert Reply:

You would need to replace the gooseneck coupler with one that has a 2-5/16 inch ball size. For that the B and W Gooseneck part # BWGNC4251 is a very popular option that would work well. It has an adjustable height tube and comes with a integrated coupler lock.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Redline about the Gooseneck Coupler Head, part #291300. They said the mounting orientation of the pin should not make any difference when installed. My recommendation would be to mount it so that the pin is the easiest to…

view full answer...

Answer 2

The Bulldog BX1 Gooseneck Coupler #BD1289200300 you ordered already has a coupler installed so you will not need to get another one. I included a video of the #BD1289200300 for you to take a look at.

view full answer...

Answer 3

The 2-5/16 inch Gooseneck Coupler Head with 1/2 inch Lock Pin, 30,000 lbs., item #291300, is cast construction and will require that a qualified weldor with experience in welding cast materials be utilized to attach the coupler to your equipment.…

view full answer...

Answer 4

The Redline Gooseneck Coupler Head #291300 includes a steel pin to secure the 2-5/16-inch hitch ball but the overall cast assembly is made of uncoated cast steel. It offers a 30K capacity.

view full answer...

Answer 5

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 6

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 9

We do have 205/75R14 size radial tires that have a load range of D and a speed rating of at least 81 mph. Out of our available selection I recommend going with the Kenda Karrier #AM10235. This tire has a max load rating of 2,200 lbs at 75 psi and a…

view full answer...

Answer 10

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 11

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit part #RR23QX offers a 1-1/4" or 2-1/4"lift so if the hitch height height is lower than the vehicle hitch height you can use this kit to bring the trailer level with the vehicle and eliminate…

view full answer...

Trailer Coupler Recommendation for Gooseneck Trailer to Convert from 3 inch Hitch to 2-5/16

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching