High/Low Hitch Adapter with 6-Inches of Rise for Use with Hitch Cargo Carrier
Question:
I need a hitch high-low adapter, at least 6”, to raise a 70lbs cargo carrier. What adapters are rated for more than 200lbs tongue weight and have the shortest distance from center of hitch pin hole to center of pin hole? The hitch on the car is rated for 500lbs tongue weight. I anticipate the max load on the carrier to be 75 lbs.
asked by: Gino R
Expert Reply:
Use of a hitch adapter like Roadmaster # RM-048-6, which offers 6-inches of rise, will have the effect of reducing your hitch's capacity by 50-percent. This results from the change in geometry - the load being further away from the hitch - and is a common side-effect of hitch adapters.
If you use this adapter your hitch capacity will be 250-lbs, and after you account for the 70-lb weight of the carrier you will then have an actual cargo weight capacity of 180-lbs (250 - 70 = 180). This adapter measures 9-1/2-inches between hitch pin holes and it offers a 400-lb TW rating.
Product Page this Question was Asked From
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 10K GTW, 400 lbs TW
- Accessories and Parts
- Tow Bar
- Hitch Adapters
- High-Low Adapter
- Fits 2 Inch Hitch
- 6 Inch Rise/Drop
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs
- Shop: Blue Ox Hitch Receiver Immobilizer II - 2" Hitches
- Q&A: Will the Blue Ox Hitch Receiver Immobilizer II Fit Factory Trailer Hitches
- Shop: Blue Ox High-Low Adapter for Tow Bars - 2-1/2" Hitches - 7" Rise/Drop - 15-1/4" Long
- Shop: Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 10K GTW, 400 lbs TW
- Video: Blue Ox Hitch Anti-Rattle - Standard Anti-Rattle - BX88224 Review
- Video: Roadmaster High-Low Hitch Adapter Installation - 2014 Ford Focus
- Video: Roadmaster Tow Bars RM-048-6 Review
- Video: Roadmaster High-Low Hitch Adapter Review
- Search Results: hitch mounts
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Malone Anti-Rattle HitchLock System Review
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Malone Anti-Rattle HitchLock System
- Shop: Trailer Hitch
- Search Results: 44649
- Shop: Trailer Wiring
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Video: Roadmaster Dual Hitch Receiver Adapter Review RM-077-4
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: 68149
- Search Results: 25580
- Article: Trailer Hitch Receiver Sizes
- Shop: Base Plate for Tow Bar
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Q&A: Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
- Video: etrailer Hitch Pin Alignment Collar Review
- Search Results: dust cap
- Article: How to Measure for Trailer Hitch Drop
on Hitch Adapters
