Replacement Landing Gear Lead Leg for Venture Landing Gear on a 2008 Komfort 5th Wheel Trailer

Question

Question:

Need a drive leg VMC900R is inside cap What is the part #? 2008 Komfort 274 5th wheel

asked by: Pat M

0

Expert Reply:

You have Venture landing gear on your 2008 Komfort 5th wheel trailer. Lippert landing gear lead leg # LC119102 can be used on your trailer if the measurements match up to what you need. The outer tube on this leg is 29-1/2 inches (including the cap). If your leg's outer tube has a different measurement let me know what it is.

expert reply by: Michael H

0

Answer 1

Lippert landing gear parts are sold under other brand names as well, such as Stromberg Carlson, Venture and Atwood, and often an alternate part fits and works perfectly well. You'll just want to match the length of the original lead/driver…

view full answer...

Answer 2

Landing gear lead leg #LC119102 has bracket stops places on the opposite side of the shaft. Lead leg #LG-179013 is a universal option and has bracket stops on both sides. So if you want you can use the universal leg.

view full answer...

Answer 3

The only follow leg I can recommend you use with your Venture landing gear would be the part #LC179014. Stromberg Carlson makes the Venture landing gear, that is the brands are different but the jacks are the same. I cannot recommend you install a…

view full answer...

Answer 4

The Lippert replacement leg part #LC119102 that you referenced is the correct replacement for your Venture landing gear VMC900R.

view full answer...

Answer 5

The Replacement Lead Leg #LC119102 will fit your Venture VMC900R landing gear. We also have the Follow Leg #LC119101 available if you wish to replace them both. The Leg #LC179013 you found is for LCI Power Landing Gear assemblies.

view full answer...

Answer 6

I would be happy to help you find replacement legs for your 5th wheel. You are going to want the Replacement Lead Leg item #LC119102 which will work well as a replacement for your Venture VMC900. Then for the matching follow leg you are going to want…

view full answer...

Answer 7

The Replacement Lead Leg for Venture 5th Wheel RV Landing Gear part #LC119102 should be correct for a 2004 Komfort 5th Wheel Trailer. The outer tube measures 29-1/2" long which I am confident is what you have since it's an industry standard…

view full answer...

Answer 8

Essentially the two jack legs are the same and either would work. Since the price is better the one I would go with is the part #LG-179013 which is the 29-1/2 inch length that you need.

view full answer...

Answer 9

Yes, the Replacement Lead Leg #LC119102 is the correct leg for your VMC900R Venture Landing Gear on your 2009 Keystone Cougar 5th wheel. The Replacement Follow Leg #LC119101 is also available if you would like to replace the follow leg as well on…

view full answer...

Answer 10

The correct replacement for your Venture VMC900R RV landing gear are part #LC119102 for the lead leg or #LC119101 for the follow leg. These will be direct replacements for the current legs you've got.

view full answer...

Answer 11

I recommend replacing your lead leg with one that has the same dimensions as your new follow leg, the Replacement Lead Jack w/ Drop Leg #LG-179013. This leg is 29-1/2" long, 2-1/2" wide, has a 4,000 lb weight capacity and can be used with…

view full answer...

Answer 12

It is likely that replacement lead leg #LG-179013 for Stromberg Carlson landing gear will fit your Venture landing gear. Both are made by Lippert and this leg works with most brands including Atwood, Lippert, and Venture like what you have.

view full answer...

Replacement Landing Gear Lead Leg for Venture Landing Gear on a 2008 Komfort 5th Wheel Trailer

Product Page this Question was Asked From

Continue Researching