Will CE Smith Post-Style Guide-Ons With LED Lights For Boat Trailers Designed For Saltwater Use

Question

Question:

are these made for saltwater use? will they last with repeated saltwater submersion

asked by: Ed

0

Expert Reply:

I called my contact at CE Smith and asked them about the Post-Style Guide-Ons with LED Lights for Boat Trailers, part # CE27760.

They told me the lights are submersible and no worries there. The posts are PVC so that is not a problem either. The L-bracket that the PVC uprights are attached to are galvanized and over time they will be affected by salt water. Rinsing them off will help delay the effects of salt water. You can also paint them before installing that would help a lot.

expert reply by: Jeffrey L

0

Answer 1

Yes, the CE Smith Post-Style Guide-Ons #CE27760 can be mounted to be as far as 19 inches from where they are mounted on the trailer. I have included a link to a video review of these guide-ons for you.

view full answer...

Answer 2

I took the picture you sent in and put the dimensions you are looking for on them. I attached the dimensions to this page for you to check out as well.

view full answer...

Answer 3

It sounds like you'll need to do some fab work in order to get the guide-ons to work. I believe your best bet would be to eliminate the u-bolts and have the brackets welded to the top or the underside of the frame member. If the fender step…

view full answer...

Answer 4

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 5

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 6

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

The best trailer we offer for your two Titan Propel 12 Kayaks is the Yakima Rack and Roll Trailer part #Y08107 paired with the Heavy Duty Shocks for Yakima Rack and Roll Trailer part #Y08110. The reason that I recommend the Rack and Roll is because…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…

view full answer...

Will CE Smith Post-Style Guide-Ons With LED Lights For Boat Trailers Designed For Saltwater Use

Product Page this Question was Asked From

Continue Researching