Vertical Upright Spacing on Erickson Over-The-Cab Truck Bed Ladder Rack EM07707 on 2011 Ford Ranger

Question

Question:

I have bed boxes on my Ranger XLT with 6foot bed and need to know the inside front to back distance between the upright posts.

asked by: Jeff M

0

Expert Reply:

According to my contact at Erickson, when their Over-The-Cab Truck Bed Ladder Rack, part # EM07707 is installed on your 2011 Ford Ranger with 6-foot bed, the space between the vertical uprights will be approximately 60-inches. Since this rack is adjustable for different beds, longer bed truck applications will have different (wider) spacing.

expert reply by: Adam R

0

Answer 1

The Erickson Over-The-Cab Truck Bed Ladder Rack, part #EM07707 measures 135 inches long x 54-13/16 inches wide x 32-7/8 inches tall. This rack has a weight capacity of 800-lbs. This is an easy, no-drill installation by clamping to the bed rails of…

view full answer...

Answer 2

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 3

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 4

When flat towing a vehicle you do not want your steering wheel to lock as this would cause your tires to drag any time you try to turn while towing. Placing your 2022 Chevy Colorado's transmission in neutral and then placing the ignition into ACC…

view full answer...

Answer 5

There is no plug-in wiring adapter for a brake controller on a 2019 Chevy Colorado; most brake controllers such as the Prodigy P3 #90195 will need to be hardwired into the vehicle. For this you can use the Replacement Brake Control Plug-In Harness…

view full answer...

Answer 6

What you are seeing is correct, and you are right about the reasoning behind it. Since the key must stay in the ACCESSORY mode to keep the steering wheel from locking up, this means that there are some components that can drain your battery over the…

view full answer...

Answer 7

The main components needed to flat tow your 2019 Chevy Colorado are a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow Bar: Roadmaster Falcon All Terrain, Non-Binding…

view full answer...

Answer 8

The only set of airbag that are available for a 2019 Chevrolet Colorado with the diesel engine at this time are the Firestone Sport-Rite Air Helper Springs part #F2587. This system is a direct fit so no drilling is required. They have a 3,000 lb…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

Yes, a 2019 Chevrolet Colorado 4x4 is flat-towable with all four wheels down. It looks like all models come with the 2-speed transfer case which is needed to be flat-towed so you should not have any issues. I have attached a list of parts for you…

view full answer...

Vertical Upright Spacing on Erickson Over-The-Cab Truck Bed Ladder Rack EM07707 on 2011 Ford Ranger

Product Page this Question was Asked From

Continue Researching