Where Is Door Bracket Mounted When Installing Enclosed Trailer Ramp Spring CB250D96SHD
Question:
I need info about the rear door CB250D96SHD . where on the door do the cables attach to retract the door. I know the unit mounts on the header and my question is about where on the door, ie top, half way, bottom. Also my current door has spring on the outside and I would like to due away with them as they are worn out. The mount for the current springs are bending the door.Will this unit work to replace the current system. if not is there a upgrade hinge kit to use on my door to move to that style of helper to eliminate the old system.
asked by: Ron M
Expert Reply:
The # CB250D96SHD is designed to work with trailer ramp doors that open from the top and when fully opened create a ramp used for loading the trailer.
The brackets that are attached to the door are typically placed at the top of the door(top of door when closed). The bar that has the springs and drums attached is mounted on the header above the door in the trailer just like a garage door spring assembly.
If you are not accustomed to adjusting the springs on a system like the # CB250D96SHD it is highly recommended to have a professional familiar with systems like this to complete the job.
Product Page this Question was Asked From
Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 250-lb Capacity
- Trailer Ramp Springs
- Dual Ramp Spring
- Conventional
- 250 lb Capacity
- 94 Inch Wide Spring
- 96 Inch Wide Doors
- Steel
- M-3 and Associates
more information >
Continue Researching
- Shop: Replacement Cables for Conventional Ramp Door Spring - 150" Long - Qty 2
- Shop: H-Channel for Enclosed Trailer - 93-1/2" Long x 2" Tall x 1-1/8" Deep - Aluminum
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 250-lb Capacity
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 185-lb Capacity
- Shop: T-Strap Hinge for Enclosed Trailers - 8" Long - 180 Degree Rotation - Stainless Steel
- Q&A: What is the Best Sealant for Trailer and RV Roof
- Q&A: Does the Roof of a Wells Cargo Utility Trailer Need to be Braced to Install Roof Vent
- Video: Review of TRC Enclosed Trailer Parts - Door and Window Seal - 362WS1048-25
- Video: Review of TRC Enclosed Trailer Parts - Doors - Ramps - 362WS1463-25
- Video: Review of TRC Enclosed Trailer Parts - 36281-955
- Q&A: Torsion Spring for Trailer Ramp Door that Weighs 200 lb
- Shop: 45" Long Side-Door Bar Lock Assembly
- Search Results: cab1~8cb150
- Search Results: h channel
- Search Results: door seal
- Q&A: How Do the Cables Get Mounted To the Doors On the Conventional Ramp Door Springs
- Q&A: When Does the Spring Tighten and Loosen on an Enclosed Trailer Ramp Spring
- Q&A: How to Determine Required Capacity of Trailer Ramp Torsion Spring
- Q&A: Would Enclosed Trailer Ramp Spring # CB250D96SHD Be Rated High Enough for 92 x 74 inch Ramp
- Video: Review of TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA6
- Video: Review of TRC Enclosed Trailer Parts - Ramp Spring - 362SA5
- Video: Review of M-3 and Associates Enclosed Trailer Parts - Ramp Door Spring - M364FR
- Video: Review of M-3 and Associates Trailer Ramp Springs - Single Ramp Spring - M374FR
- Shop: Truck Bed Tailgate Assist
- Shop: Tailgate
- Search Results: trailer door springs