Material of Polar Universal Cam-Door Lock for Enclosed Trailers with 2 Inch Keeper

Question

Question:

Is this steel or Aluminum construction? I am looking for this type of latch that would take 3/4inch Aluminum pipe. I would be looking for about 30 unit like this.

asked by: Roger B

0

Expert Reply:

The Polar # PLR158 with 2 inch keeper is made of steel construction. The # PLR158 takes 3/4 inch I.D. sized pipe.

If you prefer a 1 inch keeper the Polar # 383200 is also made of steel construction and takes a 3/4 inch I.D. sized pipe.

expert reply by: Jackie C

0

Answer 1

For the barn door on your dump trailer, I recommend looking at the Cam-Action Lockable Door Latch Kit #383200. This is a nice steel cam-action door latch with a 1 inch wide hasp that can be installed flush on doors with a 3/4 inch offset. It features…

view full answer...

Answer 2

I went out to the warehouse and pulled a Universal Cam-Door Lock #383200. I used a magnet to determine the parts are steel but the grade of steel is not listed. For the bracket that the hooks part would go into the mounting holes are 4 inches apart…

view full answer...

Answer 3

Yes, the cams (as well as the handle) need to be welded to a 34" Schedule 40 Plumbers Pipe with a 1.06" outer diameter for proper installation of the Cam-Action Lockable Door Latch Kit #383200. To keep the pipe from dropping down when the…

view full answer...

Answer 4

The Redline Universal Cam-Door Lock, #383200, will work great for your 36 inch wide doors on your trailer. You will want to use a steel pipe with an inner diameter of 3/4 of an inch and an outer diameter no wider than 1-1/8 inches. The pipe will…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 7

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 8

Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…

view full answer...

Answer 9

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 10

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Material of Polar Universal Cam-Door Lock for Enclosed Trailers with 2 Inch Keeper

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching