Bearing Kit Recommendation for a Dexter 8-247 Hub on an 84 Spindle on a 2007 Keystone Passport
Question:
Good Morning: Can you confirm that part Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal will fit a dexter hub #8-247 These axles are on a 2007 Keystone Passport. Thanks so much.
asked by: Greg S
0
Expert Reply:
The bearing kit part for 84 spindles part # BK2-100 would be the correct bearing kit for a Trailer Hub Assembly # 8-247-50UC3-EZ like what you mentioned since it comes with all of the correct bearings and seals.
expert reply by:
Jameson C
0
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Replacement 10-Inch Galvanized Drum Brakes for Boat Trailer with 14-Inch Wheels
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Pros And Cons For Switching From Electric To Electric Over hydraulic Disc Brakes On Trailer
- Q&A: What is the Overall Width and Diameter of a 235/80R16 Size Tire
- Article: Most Popular Wheel Bearings
- Q&A: Which Brakes to Fit in Dexter 8-247 Hub and Drums
- Q&A: What Info Is Needed to Pick Out Disc Brake Kit for Venture VATB 5925
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Install E-Track in 3 Easy Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern