Trailer Hitch Recommendation for Kuat Transfer 2 on 2015 Nissan Rouge
Question:
On a 2015 Nissan Rouge SV, which hitch works best with the Kuat Transfer 2 bike rack. The Curt or Draw-Tite? Im concerned the pin hole may be too far back on the Draw Tite.
asked by: Sunni
Expert Reply:
Either of the 2 trailer hitches that you referenced, the Curt # C13204 and the Draw-Tite # 75902, will work to carry the Kuat Transfer 2 Bike Platform Rack # KU74FR while it is folded down. The 2 inch receiver on these hitches will fit well with the Kuat Transfer.
However, neither of the trailer hitches will allow you to fold the bike rack up when not in use.
When we installed the Curt # C13204 on a 2015 Nissan Rogue, we found the center of hitch pin hole to bumper clearance to be 5 inches. When we installed the Draw-Tite # 75902, we found this same clearance to be 5-1/2 inches.
Since the Transfer 2 measures 5 inches from the center of the hitch pin to the closest point of the carrier when folded, neither hitch will allow you to fold the carrier up without contacting your vehicle.
Between these 2 trailer hitches, I recommend the Curt Class III Trailer Hitch # C13204 since it will require the least distance to clear your Rouge's bumper. I have attached an installation video and the installation instructions for this hitch for you.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
- Hitch Bike Racks
- Platform Rack
- Tilt-Away Rack
- Wheel Mount
- Bike Lock
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Carbon Fiber Bikes
- Heavy Bikes
- Kuat
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Are The Dimensions Of Kuat Transfer V2 2-Bike Rack When Folded Up?
- Article: Best Bike Racks for Electric Bikes
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Q&A: Kuat Sherpa 2.0 vs. Kuat Transfer V2 for 2 Inch Trailer Hitch
- Q&A: Aero Bar Roof Rack that Fits 2022 Toyota Highlander
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Differences Between Kuat Sherpa 2.0 and NV 2.0 Bike Racks
- Q&A: Lighting Solution for Kuat NV 2.0 Bike Rack
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: How to Tell Difference Between V2 and V1 Kuat Transfer Bike Racks
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks
- Article: How to Measure for Trailer Hitch Drop