Replacement Trailer Spindle that Takes L44643 Bearings
Question:
I have a spindle that takes bearing Timkin L44643 I need to replace which spindle do I need it has a 4inch shaft
asked by: John
Expert Reply:
If both the inner and outer bearings are L44643 then you have a BT8 spindle. You can use # R104BT8, # TRU97FR, or # TRU59FR. All three of these spindles are rated for 1,000 pounds by themselves so they would be on a 2,000 pound axle. I have linked videos for all 3 spindles for you.
Please note that installation of a spindle is a precision job that requires someone with experience in welding on spindles. If the spindle is welded on a little off then it can cause tire wear, suspension, and tracking problems with the trailer.
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Search Results: trailer axel
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Search Results: spring seats
- Search Results: axel
- Search Results: leaf spring
- Search Results: 1 1/16 spindle
- Search Results: trailer spindles
- Search Results: bt8
- Q&A: Process for Changing a Damaged Spindle on a Trailer Axle
- Q&A: Most Accurate Way to Measure the Length of Axle
- Q&A: Should a Spindle That is Chipping be Replaced
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Q&A: Possible Solution for Replacing Trailer Bearing L44543
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Trailer Hub That Fits BT8 Spindle for 2,000 lb Trailer Axles TRU59FR
- Video: Malone MicroSport Heavy Boat Trailer Review
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Seals - BB60011 Review
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU64FR
- Video: Timbren Axle-Less Trailer Suspension System Installation