Recommended Replacement 3-Leaf Trailer Leaf Spring for 6 x 12 Utility Trailer

Question

Question:

Hello, I am looking for a 24 1/4 3-leaf 1.5 width leaf spring for a carry on 6x12 utility trailer

asked by: Jeff S

0

Expert Reply:

Leaf springs are most often 1-3/4-inches wide but larger widths can also be found, up to 3-inches for very heavy-duty suspensions. We do not offer any leaf springs in a 1-1/2-inch width. It is likely that yours are indeed 1-3/4-inches wide so you might want to double-check.

I have linked you to our main page for 1-3/4-inch wide 3-leaf springs. You can click on the filters on the page to narrow the results down to the items with the correct dimensions and capacity for your set up.

First, you want to choose the type of leaf spring you need, either a double-eye or a slipper type. Next, you want to confirm your axle capacity; this is most often indicated on a sticker or plate on
the axle itself. Select a spring based on the total axle rating.

If a leaf spring is very well worn it may have stretched slightly. A leaf spring can "grow" as much as 1/2 to 3/4-inch in length after many years of use due to metal fatigue. Also, it is best to measure a spring when it is removed from the suspension so that it has no tension on it that could alter its dimensions.

I also linked two articles for you, one each on double-eye and slipper-type suspensions, that will help you identify which you have and also provide additional information on trailer suspensions.

Please note that we recommend replacing leaf springs in pairs. Doing so will ensure the trailer tracks straight and maintains correct geometry for proper handling.

expert reply by: Adam R

0

Answer 1

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind…

view full answer...

Answer 2

Hey there Zack, appreciate that info, and we do not offer an axle of that length, and they can be pretty tricky to find. Sometimes people will have to get their axles custom-fabricated at a local fabricator, but I do have an option to consider,…

view full answer...

Answer 3

The best option we have for you is the 3-Leaf Double-Eye Spring part #e84SR with the Single-Axle Trailer Hanger Kit part #APS4. This option will replace the leaf springs and leaf spring hanger brackets which is needed because the new double eye…

view full answer...

Answer 4

L-brackets like the part #CE26098G-2 are a great option for installing the CE Smith Fenders part #CE19503-2. If the fenders will mount right up to the side of the trailer frame I would go with the #PF1135-BKT-2 though as this would be easiest way…

view full answer...

Answer 5

It is not uncommon for a leaf spring to become elongated after years of use. One spring size we offer, 20-1/4-inches from eye center to eye center, may after years of use indeed measure slightly longer. There is certainly a chance that when new your…

view full answer...

Answer 6

TruRyde spindles, like #TRU57FR are made of automotive quality high strength steel.

view full answer...

Answer 7

It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5 on…

view full answer...

Recommended Replacement 3-Leaf Trailer Leaf Spring for 6 x 12 Utility Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching