Availability of Jeep Style Fender Measuring 10 Inch Wide x 36 Inch Long x 19-1/4 Inch Tall

Question

Question:

Im looking for a Jeep Style Trailer fender with the following dimension 12inch wide 36inch long 10tall. do you have any available?

asked by: Fabricio

0

Expert Reply:

The closest Jeep style fender we are going to have is trailer fender part # HP76VR. This fender is for single-axle trailers with 13" - 15" diameter wheels and measures 10" wide x 36" long x 19-1/4" tall.

For an aluminum tread plate fender see # CE18041ATB.

I have included a video review of this fender for you to check out.

expert reply by: Chris O

0

Answer 1

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 4

We do carry a repair kit for the Dutton-Lainson DL-1602A trailer winch. You can use Winch Ratchet Repair Kit, #DL70455, as long as your winch was made after 1999. This kit will also fit DL1402A and DL1602ADD made after 1999.

view full answer...

Answer 5

The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs #DL24239 or…

view full answer...

Answer 6

The #37213635 JR Products Replacement Landing Gear Switch you'd mentioned would be a proper replacement for your existing Atwood 70254 landing gear switch. If you wanted the switch, wiring harness and the bezel for the switch, use the Stromberg…

view full answer...

Answer 7

I spoke to Linxup and they informed me that if the battery is completely drained on the Linxup GPS Tracking Device #300-AT3, that it would take between 4-8 hours to fully charge the battery. Once charged the battery will last up to 3 months as while…

view full answer...

Answer 8

In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a service plan, you can download the Linxup mobile app…

view full answer...

Answer 9

For your application the Lilnxup GPS Tracking Device, part #300-AT3, would be the way to go. It installs anywhere on your trailer.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Availability of Jeep Style Fender Measuring 10 Inch Wide x 36 Inch Long x 19-1/4 Inch Tall

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching