How to Pick Out Replacement Vent Cover for a Cargo Trailer

Question

Question:

WHAT WOULD 2010 CARGO TRAILER CRANK UP VENTS SIZE BE TO REPLACE 2 PLASTIC TOPS

asked by: LINDA

0

Expert Reply:

Most likely the roof vents on your 2010 cargo trailer are 14 inch by 14 inch. It sounds like you are looking for a replacement vent cover for your trailer.

You will need to select the vent cover for the vent on your trailer by the manufacturer of the vent and the attachment style of the cover. It is hard to say. Some of the vent cover manufacturers, like Ventline, have changed attachment hardware in the past and there are two styles.

The newer style, like the Ventline Replacement White Dome Assembly, item # BV0554-01 , that you selected have the metal groove riveted to the back of the cover and a rounded dome. This style of cover is installed on many cargo trailers.

If your trailer vent has plastic tabs at the rear, with holes through them, the Vent Cover for Jensen Trailer Roof Vents, item # 61628 , might be the correct cover for your application.

A link to all of the vent covers we carry is provided for you to select from.

expert reply by: Jameson C

0

Juan S.

4/24/2020

Can someone tell me the part # for a 2013 jayco shower dome? I been looking can’t find it

Reply

Chris R.

4/25/2020

Unfortunately trailer manufacturers don't list out parts like these (I really wish they did) so I'm not able to track down the right replacement for your Jayco camper. Would you be able to take a couple measurements or even email me a picture of the existing dome?

Reply

Answer 1

From the information that you have given me, it sounds as though the Ventline Replacement Cover, #BV0554-01, which fits post-1995 Elixir trailer roof vents, would work for you. This is a domed replacement cover for 14-1/4 inch by 14-1/4 inch roof…

view full answer...

Answer 2

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 3

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 12

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

How to Pick Out Replacement Vent Cover for a Cargo Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching